Ropetex Traction Lube 40 is a synthetic lubricant which coats wire surfaces with a slip-resistant film. It is designed for situations in which frictional grip is vital, because it provides internal lubrication whilst avoiding excessive build-up with repeated applications.
Typical applications: Lifts, elevators and traction hoists.
Application methods: Portable sprayer or brushing/dripping.
Minimum application temperature: -5°C (product should be kept to at least 10°C for 48 hours before application).
Color/texture: White water fluid.
NLGI Grade: Solvent liquid
4-ball weld load: > 110 kgf
Available in a 20 liter drum.
Extra:
Do not forget to download the white paper with a lot of useful information about wire rope lubricants. It is free!
(see 'downloads' at the bottom of this page).
- Temperature range: -55°C up to +40°C
ROPETEX traction lube 40
ROPETEX traction lube 40, back
ROPETEX traction lube 40, side
ROPETEX traction lube 40 on ROPETEX wire rope drum
ROPETEX traction lube 40 logo
Download CAD
Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.
To download CAD files, you must provide a valid e-mail address
ROPETEX traction lube 40
ROPETEX traction lube 40, back
ROPETEX traction lube 40, side
ROPETEX traction lube 40 on ROPETEX wire rope drum
ROPETEX traction lube 40 logo